What Do You Know About

Basic Guide to Finding Hidden Valves and Piping

It is important that you know the details of your home like the back of your hand in case you are a homeowner. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.